FOR CURRENT DISCOUNTS, SEE TERMS OF SALE TAB (LEFT).
With few exceptions, you get free shipping on orders over $100.00, lower 48 States of the USA.
We accept Visa, MasterCard, American Express and Discover.
For PayPal Transactions we can email a Request for Funds.
Purchase Orders will be accepted for Domestic US Companies with an approved Credit Application.
The Wessels, Fixed Diaphram, Non-ASME, Expansion Tanks.
These Expansion Tanks come in ten models:
Materials = Steel with Epitaxial® Inner Liner, Heavy Duty Butyl Diaphragm;
Maximum Pressure = 150 PSIG; Maximum Temperature = 200oF;
Finish = Blue Powder Coat Exterior; Factory Pre-charge = 30 PSIG
THERMAL EXPANSION TANKS
Thermal tanks are used to absorb the additional volume of potable water created by a domestic water heater. Properly sized, the tank will maintain system pressures below relief valve settings. Typically used in domestic water heating systems or other systems where corrosive system fluid requires stainless or corrosive resistant wetted parts.
SIZING THERMAL EXPANSION TANKS
To properly size a thermal expansion tank, five critical pieces of information are required:
- Total System Volume (in gallons) – Includes water heater(s) and re-circ. line volume
- Minimum In-coming Water Temperature (in degrees F)
- Maximum Water Heater Set-point Temperature (in degrees F)
- Minimum Static Water Pressure (in psig)
- Maximum Safe Pressure (in psig) – Typically relief valve less 10%
Use the following form and acceptance factor table to calculate tank sizing by hand, or use the WESSELECT® Sizing Program to automatically calculate the size and model. The program can be downloaded from: www.wesselscompany.com.
If you have any questions contact us by Clicking Here.
Prices are for the Continental 48 States of the USA Only.