Legionella Systems (Filtration) Test Kit
*Note: This product cannot be redeemed using rewards points.
FOR CURRENT DISCOUNTS, SEE TERMS OF SALE TAB (LEFT).
With few exceptions, you get free shipping on orders over $100.00, lower 48 States of the USA.
We accept Visa, MasterCard, American Express and Discover.
For PayPal Transactions we can email a Request for Funds.
Purchase Orders will be accepted for Domestic US Companies with an approved Credit Application.
Legionella System Test Kit (formerly known as Legionella Industrial Test Kit or Filtration Test Kit):
This test kit is sold under the Albagia, Hydrosense, Lovibond, Orbeco-Hellige, or Tintomere brand names.
The Hydrosense Legionella pneumophila System Test Kit is recommended for Cooling Towers and Whirlpool Spas. This is a very rapid test used for lndustrial systems. Test results are obtained in 30 to 35 minutes. Cooling water often contains high levels of suspended solids, which can make membrane filtration very slow or even impossible. Using the Hollow Fibre Filtration modules, the Industrial Legionella Test overcomes this problem to enable on site testing of Legionella pneumophila in almost any sample, with no other specialized equipment.
This is the Hydrosense Part Number 100182.
This is the Lovibond Product Number 56B006101. L56B006101
Some are calling these test kits Litmus Cell Dipslides. So, we thought we would use that.
This kit contains materials for the performance of 5 test iterations. COMPARE THIS TEST KIT TO A LABORATORY TEST COSTING $150 TO $200 EACH WITH A WAIT TIME OF 10 TO 14 DAYS FOR THE RESULT.
The sensitivity of the Industrial Kit is up to 100 CFU/Liter (0.1 CFU/ml) for Legionella pneumophila Serogroup 1.
- These tests are optimised for use with industrial water systems, cooling towers and whirlpool spas.
- This filtration step needs no pumping, just connect the sample point to the water system and use the system pressure to drive the filtration.
- Single use hollow fibre filtration modules.
- Pre-filled syringe containing recovery buffer, no need to measure or dilute solutions.
- The test is simple to use and fast, with no interpretation required.
- Results are easy to read and obtained within 30 to 35 minutes.
- The test allows immediate understanding and response to the water conditions.
- Use can reduce risk of outbreaks and litigation.
- Regular use will increase confidence in your Legionella control.
To view or download a PDF product bulletin for this product, Click Here.
To view or download PDF instructions for this product, Click Here.
To view a video on this product, Click Here.
To view or download a side by side comparison of all the new Legionella Test Kits, Click Here.
|Bacteria detected||Legionella pneumophila serogroup 1|
|Detection method||Lateral flow immunochromatographic assay|
|Lower limit of detection||Up to 100 CFU/L (0.1 CFU/mL)|
|Specificity||Tested against a wide range of waterborne bacteria, including Acinetobacter calcoaceticus, Aeromonas hydrophila subsp. hydrophila, Bacillus subtilis, Burkholderia cepacia, Citrobacter freudii, Citrobacter koseri, Escherichia coli, Enterobacter cloacae, Klebsiella oxytoca, Pseudomonas aeruginosa, Pseudomonas fluorescens, Pseudomonas putida, Pseudomonas stutzeri, Ralstonia pickettii, Raoultella terrigena, Streptococcus pyrogenes, Yersinia ruckeri. No cross reactions observed at concentrations <= 10^9 CFU/L. Staphylococcus aureus has been observed to cross react with the test at concentrations > 10^8 CFU/L. Legionella pneumophila serogroups 4 & 7 cross react with the test at concentrations >10^9 CFU/sample. The test does not react with any other L. pneumophila serogroups or L. species tested.|
|Test volume||100 μL|
|Suggested sample volume||250 mL|
|Sample parameters||Sample should filter in less than 10 minutes.|
|Biocides||The product has been tested with a range of common biocides and biodispersants used in Legionella control, at their normal maximum operating concentration. Active ingredients tested include: glutaraldehyde, didecyl-dimethyl-ammonium chloride, isolthazoles, dibromonitrilopropionamide, ionic and non-ionic surfactants. The test gives a false positive if used with polymeric biguanide or THPS.|
|Operator time||5 - 10 minutes|
|Development time||25 minutes|
|Sample point||Supplied with both ½” and ¾” female threaded fittings, additional sample points are available (part no. 100171)|
|Shelf life||18 months from manufacture when stored at room temperature (<30°C) in original packaging.|
Prices for the Continental 48 states of the USA only.
Kittiwake FG-K29555-KW: Legionella Testing Kit (Serogroup 1)